Teresa Collins - Step by Step

There are more and more layouts which have alot of WHITE SPACE, so today I am going to show you how I created this layout using the gorgeous Now & Then Papers from Teresa Collins.

 

Products  you will need

Papers - Woodgrain,  Bee, Damask, 

Diecut Sheet, Buttons & Emerald Dots

Black Ink, Sewing machine, Black Thread

Foam Dots and Plain Chipboard to layer you photo on.

***********************************

1.  Using your sewing machine, randomly sew on the top right hand corner of the Woodgrain Paper, as well 

     as a little zig zag at the bottom

 

 

2.  Now cut the Damask, as well as the back of the Woodgrain to measure as shown below - 

     Ink all the edges

 3.  Do the same with the bottom two little strips which will measure the same length as your zig zag sewing

4.  Cut your photo down to size as well as the Bee Paper.  Ink around the edges, and place your photo 

     onto a spare piece of chipboard - this gives the photo a little height and dimension. 

 

5.  Using the little triangles from the Diecut sheet - ink around the edges and put some foam tape or dots 

      underneath each one and place under your sewing (top right hand side).  Tip:  If you don't have the 

      diecut sheet, you can just make your own triangles.

 

6.  Lastly place a button on the round diecut circle and place on the top of your photo as well as the Title 

     (Remember) - to tie the yellow button in I have used the yellow Emerald Dots at the bottom of the Title.

  

 Your layout is now done, simple right?  Hope you have enjoyed the step by step instructions, and I will be back again show casing some other layouts using this gorgeous range of paper.

TFL and Happy Scrapping

Heidi 

 

Tweet

Pin It